India
Uniwater in Ranchi.
Mixed sources across the older centre and the newer south/east corridors. Borewell-heavy, iron a recurring feature.
The water
What Ranchi water actually looks like.
Iron is commonly present in residential borewells across Ranchi. Pre-treatment ahead of softening is the standard sequence — treating tap-by-tap exhausts softening resin in months. Municipal supply in the older centre is largely treated but variable in pressure.
Service areas
Where we’re active in Ranchi.
Not an exhaustive list. If your locality isn’t mentioned, we likely still serve it — the survey response is the same.
Lalpur
Kanke Road
Doranda
Ratu Road
Morabadi
Harmu
Hinoo
Water by locality
What the water reads, area by area in Ranchi.
Indicative ranges only — Kolkata from our field experience, other cities from published regional groundwater studies. Groundwater varies borehole to borehole, so the number that sizes your system is the one our engineer measures at your address, not the band below.
| Locality | Iron | Hardness | TDS | Dominant issue | Typical system |
|---|---|---|---|---|---|
| Lalpur | 0.4–2 ppm | 150–320 ppm | 350–700 ppm | Borewell iron staining (yellow/orange) with moderate hardness. | Iron removal filter ahead of HomeSoft softening. |
| Doranda | 0.3–1.5 ppm | 150–300 ppm | 300–650 ppm | Iron on borewell-fed stretches; hardness scale on fittings. | Iron pre-treatment, then softening; sized at survey. |
| Kanke Road | 0.3–1.5 ppm | 140–300 ppm | 300–650 ppm | Moderate hardness with localised iron. | HomeSoft softening with an iron stage where the borehole needs it. |
| Morabadi | 0.3–1.2 ppm | 140–280 ppm | 300–600 ppm | Mixed supply; iron where boreholes feed in. | HomeSoft softening; iron pre-treatment on borewell supply. |
Lalpur
- Iron
- 0.4–2 ppm
- Hardness
- 150–320 ppm
- TDS
- 350–700 ppm
Borewell iron staining (yellow/orange) with moderate hardness.
Iron removal filter ahead of HomeSoft softening.
Doranda
- Iron
- 0.3–1.5 ppm
- Hardness
- 150–300 ppm
- TDS
- 300–650 ppm
Iron on borewell-fed stretches; hardness scale on fittings.
Iron pre-treatment, then softening; sized at survey.
Kanke Road
- Iron
- 0.3–1.5 ppm
- Hardness
- 140–300 ppm
- TDS
- 300–650 ppm
Moderate hardness with localised iron.
HomeSoft softening with an iron stage where the borehole needs it.
Morabadi
- Iron
- 0.3–1.2 ppm
- Hardness
- 140–280 ppm
- TDS
- 300–600 ppm
Mixed supply; iron where boreholes feed in.
HomeSoft softening; iron pre-treatment on borewell supply.
BIS acceptable limits (IS 10500): iron 0.3, hardness 200, TDS 500 mg/L.
The team
Local engineers. Not subcontracted.
Ranchi service team. 48-hour survey response across the city.
Real installs
Recent installs in Ranchi.
Lalpur
Kanke Road
Doranda
Systems we install here
What goes into a Ranchi home, typically.
The right answer comes from the survey, not the catalogue. These are the four systems most commonly specified in Ranchi, in order of how often they appear on installation invoices.
HomeSoft
One softened, filtered supply for the whole house. Every shower, every sink, every appliance.
BathSoft
A bathroom filter has to do three things at once: treat the water, fit the space, not announce itself.
Drinking water systems
The one tap where chemistry beats every other concern. RO or UF + UV is a 10-minute test, not a sales decision.
Charnock Hospital
Drinking-water RO at point of use, building inlet WTP, monthly AMC.
Service is the system
Most water companies show up when something breaks. We show up every month.
Automated.
Backwash, regeneration, flush — the system handles routine cycles on a schedule. No valves to turn.
Verified by an engineer.
Monthly site visit. Pressure check, media inspection, hardness/iron spot test, written report.
Owned by us.
If something needs replacement or recalibration, we do it. No customer chasing parts.
The discipline that decides year four.
Your next step
Ready for a free survey in Ranchi?
A Uniwater engineer will visit, test your water, and respond within one business day.