HomeSoft.

One softened, filtered supply for the whole house. Every shower, every sink, every appliance.

From ₹50,000. Final price after the free survey.

Book a free survey Or call us

The problem this solves

What changes when the water is right.

Treating water tap-by-tap means six service contracts. Treating at the inlet means one.

Geysers, washing machines, dishwashers fail early on hard or iron-bearing water.

BathSoft helps the bathroom. The kitchen sink, the washing machine, the garden tap still get raw supply.

Borewell-fed homes need iron removal upstream of everything else. Or everything else fails faster.

How we solve it

Sized to the water, the house, and the people in it.

Chemistry

decides the media.

Household

decides the capacity.

Architecture

decides where it goes.

Engineered, not bought off a shelf.

Inside the vessel

The engineering, in section.

What the system looks like on the cutaway. Media bed, distributor, freeboard, control head — the visible engineering that decides what the water does over the next fifteen years.

HomeSoft — engineering cross-section showing vessel internals, media bed, distributor, and control head

The four-stage train

Sediment. Iron. Carbon. Softening.

What’s included

Everything to put it in. Everything to keep it running.

Four-stage train

Sediment + iron + carbon + softening. 2K / 4K / 6K LPH per house.

Brine tank + controls

Salt reservoir for softener regeneration. Manual or automatic per configuration.

Installation

Plumbing, electrical, mounting, commissioning. Documented before handover.

Water analysis

Pre + post-install parameter readings. Repeated on every visit.

One-year warranty

All system components covered. Replacement, not repair-by-letter.

One-year AMC

Monthly visit on Comprehensive. Salt top-up rolled in; no separate bill.

Where it goes

Five places it goes.

HomeSoft treats every tap from a single point. Five canonical install locations -- decided at survey, against the house.

Two branded Uniwater HomeSoft vessels floor-mounted in a finished home utility area beside the washing machine

Utility room

Indoor controlled environment. Service access on day one.

Balcony

Behind a service door or cabinet. Apartment installs where there is no utility area.

Terrace

Gravity-feed from the OHT. Weather hood + drain provisioned at survey.

Basement

Villa plant rooms. Full four-stage train + sump-pit backwash routing.

Branded Uniwater HomeSoft vessels in a custom joinery-grade enclosure in a finished home corner near tall windows and planting

Custom cabinet

Joinery-grade enclosure designed with the architect — the plant fits the house.

Configurations

Three or four sizes. Decided by load, not by SKU.

We don’t expose part numbers. The configuration is decided at survey based on bathroom count, household draw, and water chemistry.

2K

2,000 LPH

3–4 bathroom homes. Mid-rise apartment, compact villa.

Most chosen

4K

4,000 LPH

5–6 bathrooms, small villas with utility loads.

6K

6,000 LPH

Large villas, duplexes, garden draw. Highest residential capacity.

Technical specifications

For the architect, plumber, or engineer.

Surface what matters; collapse what doesn’t. Open the rows below for the engineering detail.

Components from

WiloGrundfosResinTechKataloxHydranauticsDowLG ChemTulsionIonex

Capacity & sizing

Capacity range: 2,000 — 6,000 LPH
Service flow: Sized to peak household draw
Backwash flow: 1.5× service flow

Materials & media

Vessel: FRP / SS316 (Plastic or Stainless Steel)
Media: Per-solution — selected at survey
Internal piping: CPVC / SS316

Controls & regeneration

Mode: Manual or Automatic
Regeneration: Timer-based or volumetric on Automatic models
Indicators: Pressure gauges; flow indicator on Automatic models

Installation requirements

Inlet pressure: 1.5 — 4.5 kg/cm²
Power: 230V AC for Automatic models; none for Manual
Drain: Adjacent to install location
Space: Sized per configuration; see install diagram

Take the spec to your architect.

A 2-page PDF data sheet with capacities, materials, dimensions, and the install diagram.

Download data sheet

Frequently asked

What homeowners ask before they book.

What are the four stages of the HomeSoft train?

Sediment removes particulate; iron removes dissolved iron and manganese; carbon adsorbs chlorine and organics; softening swaps calcium and magnesium for sodium. Order matters — sediment first protects everything downstream. Each stage is optional; the four together are the canonical residential build.

How much space does a 2K / 4K / 6K LPH plant need?

A 2K LPH plant fits in about 6×4 ft. A 4K LPH in 8×4 ft. A 6K LPH in 10×5 ft. Plant rooms, utility corners, terraces, garden corners — five canonical install locations, decided at site survey.

Do I need to know my TDS or hardness before booking a survey?

No. The survey includes a free water test on the spot. The engineer takes the reading and walks you through what it means before any quote.

How long does installation take?

A whole-house install typically takes one to two days. The bulk of the time is in the plumbing, not the equipment.

What if my supply chemistry changes over the years?

Monthly service includes parameter testing. If the chemistry drifts — borewells often do over years — we recalibrate media, regeneration cycles, and dosing.

Can I see what the system would cost before the survey?

HomeSoft starts at ₹50,000 (MRP inclusive of 18% GST). Final price is set after the free survey, based on your specific water and home.

Is the AMC included? What does it cover?

Year one of AMC is included with every install. Standard tier is quarterly, Comprehensive is monthly. Both include parameter testing, media inspection, and a same-day written report.

Real installs